Photobiomodulation System
The MTCURE BIOPHOTO therapy system utilizes dual-wavelength pulsed light bioregulation, incorporating a short wavelength of 660 nm, which effectively alleviates pain, along with a long wavelength of 850 nm, providing a mixed modulation approach.
The short wavelength of MTCURE represents visible red light, which is effective for pain relief and tissue repair. The long wavelength, on the other hand, consists of invisible photon signals that offer excellent modulation for deep inflammatory conditions within the body, including muscles, bones, and nerves.
MTCURE has meticulously designed the dosage for dual-wavelength mixed light therapy, tailoring the therapy energy based on exclusive research related to Asian musculoskeletal health. This design enables a synergistic effect on bodily ailments, helping to eliminate pain, facilitate the repair of damaged/injured tissues, enhance blood circulation, boost metabolism, and promote recovery from inflammation.
Due to MTCURE’s independently designed mixed light therapy system adhering to strict clinical standards, its effectiveness in penetrating the body and the efficiency of absorption surpass that of most products on the market. Typically, the irradiation range, penetration depth, and absorption efficiency of available products are quite limited.
Phototherapy NMES Rehabilitation Belt
Product Features
- NMES (Neuromuscular Electrical Stimulation) Uses pulsed microcurrents to stimulate muscles and the nervous system. This can effectively promote blood circulation, relieve pain, assist in neuromuscular rehabilitation, reduce muscle fatigue, and enhance muscle strength.
- Heat Therapy Heat therapy helps relax tired and sore muscles.
- Photobiomodulation Therapy (MT-PBMT) Combines visible and invisible spectrums of biological red light and infrared light. It systematically covers epidermal tissue down to deep musculoskeletal tissue, effectively promoting wound healing and tissue repair, while relieving pain and inflammation.

【How to Use】
- 1. Take out an extension belt and wrap the belt around your body. Then press and hold the
switch button for 2 seconds to turn on.
2. The power indicator will light up in blue and the LED show 00 in blue, which means the
rehabilitation belt is under the standby mode.
3. After that you can control the belt with remote control or directly press the button
of controller. Each press of the button will emit a “beep” sound as a prompt. If you don’t
hear the prompt sound when pressing the button, it means that the massage time is up.
Please press the power switch to restart.
4. Please choose the corresponding function according to your needs. You can use 3
functions at the same time, or only take 1 function, depending on your needs.
5. If you have selected the NMES function, suggest you apply some water-based gel or water
on your skin to enhance the conductivity of your skin. And make sure the rehabilitation belt
contacts the skin firmly, Otherwise, the electric impulse cannot be transmitted to your muscle.
6. Please don’t use 1 position over 20 mins.
7. Low voltage warning, when the battery voltage is lower than 3.35V, the power indicating
light will flash, flashing for 15 seconds to shut down. Then you should charge the
rehabilitation belt.
【Charging instruction】
1. Before the first use, charge the rehabilitation belt for about 5 hours and fully charge it.
2. Plug in the USB-C cable to the charging jack of the device and the other end of the USB plug
into the adaptor with 5V/1A output. The power indicator blinking in blue.
3. When all the power indicators stop flashing and keep on, it means the
battery is fully charged.
4. For the remote control, put the CR2032 battery by opening the
battery compartment and sliding the door located at the back of
the remote control. And the remote control can only remote the
rehabilitation belt under the standby mode.
5. Charge or discharge batteries to approximately 50% capacity before
storage. Recharge the battery to approximately 50% capacity at least
every 3-6 months. Store product at a temperature between 5 °C and 25 °C.
6. Do not use while charging.
【Safety Precautions】
- • Do not use the NMES and Heat functions on areas that have implanted metal or other
materials, as well as areas with inflammation. It is recommended to use Red Light and
Infra-Red Therapy instead and keep the product at a distance of 3-5mm from the skin
surface.
• Avoid using the NMES and Heat functions on areas with wounds, pimples, or suppurative
diseases. Once the wounds have stopped bleeding or the tissue sprain has healed, it is
advisable to use only Red Light and Infra-Red Therapy to promote faster healing. After 72
hours or when the wound has fully healed, it is safe to use the machine.
• Do not use the machine on the heart, eyes, or private parts.
• Pregnant women and puerperal are not allowed to use the machine on abdominal.
• Do not directly view the light. (Included wear sunglasses or protective spectacles)
• Please do not place heavy objects on this product.
• Do not use other therapy devices while using this product.
• Please note this is not a medical device, it is not to be used for medical treatment purposes.
Only use for improvement and relief purposes.
【People who have the below symptoms, please consult a doctor before use】
- • People who are suffering from heart disease or carrying electronic medical equipment
such as heart pacemaker.
• People who have cancers, acute illnesses, heart diseases, or severe high blood
pressure, tuberculosis patients, etc.
• People who have acute pain and cause to edema, bacterial infection, inflammation,
fracture, sprain, muscle strain.
• People who have skin diseases, such as infections skin diseases, the skin is insensitive
to heat and wounds, or patients who are allergic to light and are deemed unfit to use this
product by their doctor etc.
• People who are receiving medical treatment, especially those who are physically unfit.
• People who a bleeding tendency.
• People who have a fever.
• Elderly with serious uncomfortable.
• Pregnant women, women who just give birth or are in the menses period, newborn baby.
• Children under 10-year-old or people mentally unbalanced without being supervised are
not allowed to use this machine.
• Stop using this product if it causes discomfort, and please consult a doctor.
• We reserve the right of the final interpretation. If the hidden dangers caused by
unreasonable use, we would not take all the consequences.
<<For detailed usage instructions and safety precautions, please refer to the product manual.>>
Belts size: Rehabilitation belt: 140mm x 915mm
: Short extension belt: 90mm x 350mm
Charging voltage: 5V USB 1A
Battery capacity: 3.7V 4000mAh
Max. Rated power: 9.8W
Max. output Current: 2650mA
NMES – Max. Intensity: 1 mode with 20 intensity
NMES – Frequency Generation: 1.667 – 16.67Hz
NMES – Max. output voltage: 13V – 42.1V (under 1KΩ)
Heat: 3 levels : Blue for 1st Level 38℃>
Green 2nd Level 41℃ >
Red 3rd Level 45℃ (+/- 5℃)
Photon: 72 pcs of 660nm red light (visible light),
24 pcs of 850nm near-infrared (invisible light)
Charging time: 5 hours
Work for when full charge: 90 minutes
Auto Timer: 10 minutes
Phototherapy Neckcare

Combining the Traditional Chinese Medicine Concept of “Where There Is Flow, There Is No Pain” to Address Common Pain in the Shoulders, Neck, and Head
In Traditional Chinese Medicine (TCM) theory, the concept of “where there is flow, there is no pain” emphasizes that smooth circulation of qi and blood within the body is essential to prevent the occurrence of pain. Common pains in the shoulders, neck, and head are often caused by factors such as stagnant qi and blood stasis, and obstruction in the muscles and bones.

Product Functions
Heat Therapy
Heat therapy can help relax fatigued and sore muscles at a constant temperature of 42℃ (+/- 3℃).
Benefits:
- Relieves pain
- Promotes blood and lymphatic circulation
- Aids in recovery

MT-PBMT Photobiomodulation Therapy
Photobiomodulation therapy combines visible light at 660nm and invisible light at 940nm, systematically covering the epidermal tissues down to deep muscle and bone structures. It effectively promotes wound healing and tissue repair while alleviating pain and inflammation.
Benefits:
- Relieves pain
- Reduces inflammation
- Promotes tissue repair

Using the MTCURE BIOPHOTO light therapy system, it features a dual-wavelength pulsed light modulation functionality with a short wavelength of 660nm and a long wavelength of 940nm, employing a mixed modulation approach.
The 940nm wavelength has stronger penetrating power, allowing it to penetrate deep into the skin and reach the cells. It promotes the production of collagen and elastin, improves skin texture, reduces wrinkles, and accelerates wound healing. It also enhances blood circulation and alleviates inflammation and pain.
The 940nm wavelength has unique water absorption characteristics, making it suitable for applications in the complex structure of the cervical spine. The light energy at 940nm is “selectively” and “moderately” absorbed by water molecules in biological tissues. Its optimal characteristics work synergistically with the complex structure of the cervical spine, achieving the best modulation effects in treating deep structures such as cervical spondylosis, dowager’s hump, intervertebral discs, and nerve roots.








- Effectively Relieves the Following Symptoms:
- Skin repair on the back of the neck
- Neck muscle strain
- Fascia repair
- Superficial inflammation
- Deep muscle spasms
- Intervertebral disc degeneration
- Herniated discs
- Nerve root compression pain

Usage Recommendations
Daily Wellness and Superficial Symptoms: It is recommended to expose the area for 15–20 minutes daily for visible effects.
Deep-seated Conditions (e.g., Intervertebral Disc Degeneration): Extend the duration to 28–30 minutes per session, with a recommendation for continuous daily use.
Nerve Compression or Herniated Discs: It is advised to combine with heat therapy to enhance effectiveness, using it for 30 minutes daily and maintaining daily use.

Product Specifications and Parameters
Product Name: Phototherapy Neckcare
Model Number: MAX-E03HXRE200
Charging Voltage: 5V == 1.5A
Battery Capacity: 3.7V 1900mAh
Rated Power (Max): 8W
Photons: 30 pieces of 660nm red light (visible light) / 90 pieces of 940nm near-infrared light (invisible light)
Charging Time and Battery Life: Charges in <2.5 hours and can work continuously for 1-3 hours (depending on heating/red light modes)
Automatic Timer: 20 minutes
Product Dimensions: 15.6 x 14.6 x 4.6 cm
Product Weight: 171g








































